Go through assembly guide before you start your work. We recommend to use a sharp scalpel to remove
parts carefully.
Heat up PE parts with lighter before use, brass will soften and become easy to bend and work with
Tamiya Super Thin Glue
recommended for plastic parts, let the glue work for a few seconds, then push
parts together, melted plastic will fill the gaps between parts. You can also melt sprue frame and use
it as an amazing filler for small works, or use this glue to wash out tiny seam lines on little parts or make
texture on some parts etc.
You might need to adjust some holes with drilling bits
58
23
33
40
11
10
54
52
53
X2
55
57
45
56
13
12
PE2
51 39
38
1
AA
