9
8
04. Fan placement
Tip
Insert the fan all the way in.
Do not force it in.
Ensure that the "IN" sign is facing
the Mist-maker and the arrow facing
down. Click the fan inside the groove.
Do not force it in. See Diagram 4-1.
Diagram 4-1
Mist-maker fan
03. Mist-maker placement
Ensure the grooves of the Mist-maker
line up with the positioning of the "fins"
in the bottom of the Floating Base.
The wires should maintain a 90 degree
angle (see Diagram 3-1).
90°
Diagram 3-1
Diagram 3-2
Warning
Please treat Mist-maker with care.
The unit may get damaged
if you pull the cable or fan too
hard. Please refer to Diagram 3-2
for installation details.
Warning
The humidifier will not produce any mist if the cable
wire blocks the top of the Mist-maker(ultrasonic engine).
Please position it as shown in Diagram 3-1.
Hold this
part
Align your Mist-maker on top
of the grooves and push it all
the way down.
Ultrasonic Mist-maker
Mist-maker engine
