Miro MIRO-NR07BR, Руководство пользователя

Страница: 11 / 25

Use
Start driving
Refer to the # device connection page and pair the remote control (RC) with the miocon before powering on.
After you connect the instrument, press and hold the Remote Control (RC) humidity button to turn on the power.
- When power is off: All display, button operation is disabled. (Except long humidification)
- All movements must be consistent with the micro-cans. (Miroconity changes when controlling the humidity level
of the remocan (RC)
- Once paired, automatic connection is achieved.
- Click briefly to pair, and click for 3 seconds to break the pairing. (You will also see the seconds in the segment
when you press and hold the pairing button.)
- RC display lasts for 3 seconds (micro-conditioner display continues) and is activated according to changes in the
touch/slope of the remote control (RC) button.
Adjusting the Humidity
[To adjust with remotes (RC)
-You can adjust the humidity by pressing the humidity button (water droplet shape) while power is on. Press the
humidity button briefly to adjust the humidity in the order of approximately – medium – river – off.
You can also adjust the power to ON/OFF by pressing and holding the humidity button.
*The initial value of post-power humidification is step 1.
[Mirochanically Adjusted]
You can adjust the humidity by pressing the humidity button briefly in the same way as in - RC Adjustment .
Press and hold the humidity button to turn off the power.
Setting Timer
Timer setting is possible with the timer button (clockwise). Pressing the timer button briefly allows the timer
function to be used in the order of OFF- 1H- 4H-8H.