MIRKA AP 300NV Скачать руководство пользователя страница 34

Страница: 34 / 128

Symptom

Possible Cause

Solution

Low power and/or low free

speed.

Insufficient air pressure.

Check air line pressure at the Inlet of the tool while

the tool is running at free speed. It must be 6.2 bar

(90 psig/620 kPa).

Clogged Muffler)s(.

The Muffler can be back-flushed with a clean, suit

able cleaning solution until all contaminants and

obstructions have been removed. If the Muffler can

not be properly cleaned then replace it. Replace

Muffler Insert.

Plugged Inlet Screen.

Clean the Inlet Screen with a clean, suitable

cleaning solution. If the Screen cannot be cleaned,

replace it.

One or more worn or broken vanes.

Install a complete set of new Vanes (all vanes must

be replaced for proper operation). Coat all vanes

with quality pneumatic tool oil.

Internal air leakage in the Motor Housing

indicated by higher than normal air con-

sumption and lower than normal speed.

Check for proper Motor alignment and Shield

engagement. Check for damaged O-Ring in Front

End Plate. Remove Motor Assembly and re-install

the Motor Assembly.

Motor parts worn.

Overhaul Motor. Contact authorized Mirka Service

Center.

Worn or broken Gear Bearings.

Replace the worn or broken Gears and/or Bear-

ings.

Air leakage through the Air

Regulator and/or Valve Stem.

Dirty, broken or bent Valve Spring, Valve

or O-Ring.

Disassemble, inspect and replace worn or dam-

aged parts.

Vibration/rough operation.

Incorrect Pad.

Only use Pad sizes and weights designed for the

machine.

Addition of interface pad or other material.

Only use abrasives and/or interfaces designed for

the machine. Do not attach anything to the Tool’s

Pad face that was not specifically designed to be

used with the Pad and Tool.

Improper lubrication or buildup of foreign

debris.

Disassemble the Tool and clean in a suitable

cleaning solution. Reassemble the Tool.

Worn or broken Rear or Front Motor

Bearing(s).

Replace the worn or broken Bearings.

Troubleshooting Guide

300NV

Rev

02/06/17

Содержание AP 300NV

































































































































Результаты поиска

Содержание AP 300NV

Отзывы:

MIRKA AP 300NV, Руководство по эксплуатации, Страница: 34 / 128

Результаты поиска

Содержание AP 300NV

Отзывы: