14
Installation
3.6
Mounting the Enclosures
To mount the enclosure on a DIN rail
Mount the enclosure so that the terminal labels are the right way up and the mounting clip is
on the bottom as shown in Figure 9.
1. Mount a section of DIN rail so that there is enough space for the enclosure to be
mounted.
2. Slide the hooks under the rail and push the enclosure to secure it on the DIN rail. The
mounting clip locks it in place.
Figure 7
Enclosure mounted on DIN rail (circuit board not shown)
Attention: Mount the RF module on a DIN rail in a UL-compliant plastic box to
allow reception of RF signals from the OpenBAS-HV-WLSTH
transmitter.
Mount the I2C module on a DIN rail in a UL-compliant metal or plastic
box.
Do not drill holes in the enclosure or modify the enclosure in any way.
!
