Mircom OpenBAS-HV-NX10 Series, Руководство по установке

Страница: 19 / 45

19 (45)
Installation
To install or replace the battery
1. Disconnect the mains power and open the mains breaker.
2. Disconnect all wiring from the unit.
3. Remove the top cover as described on page 21.
4. Disconnect the old battery.
5. Dispose of the used battery promptly. Keep away from children. Do not disassemble and
do not dispose of in fire.
6. Connect the new battery to the connection shown in Figure 4. The battery wire can be
connected only one way.
3.9 Enclosure Dimensions
Figure 11 Enclosure (back view)
3 35/64” (90 mm)
6 9/32”
(160 mm)
Mounting
clip
Hooks