18
Keypad Configuration & Operation
.
9.2
Command Menu
The main command menu is pictured below. The first line of the LCD will always show “-
Command Menu-“, and the second line displays the different selections. Use the “UP” and
“DOWN” keys to move through the menu, and press the “ENTER” key to make a selection. To
exit from the main command menu, press “CANCEL” or select the “Exit” menu option and then
press the “ENTER” key.
After you select a feature item by pressing the "ENTER" key, use the "UP" and "DOWN" keys to move
through the different features. Use the "LEFT" and "RIGHT" keys to change the values.
To confirm the
changes press the "ENTER" key.
To go one level back press the "CANCEL" key.
Note:
Command Menu feature 9 and 10 can only be accessed if jumper JW2 is placed
on the main board. See Table 2.
i
-Command Menu-
1. View Event Log
2. Clear Event Log
3. Test Dialer
4. Config Info
5. Version Info
6. Set Time
7. Set Password
8. Default Config
9. Dialer Config
10. Input Config
11. Exit
Содержание DTC-300A
Страница 2: ......