Guide to Installation and Operation
7
Pushbutton Selection
The “Select” pushbutton allows the selection of different process-
ing modes, according to the input format. When the pushbutton
is depressed once, the LED indicating the currently selected pro-
cessing mode flashes red and green; when depressed again, the
alternate option LED flashes in its turn if it is available. Confirm
the selection by depressing the pushbutton again. Other pro-
cessing modes are accessed by depressing the pushbutton con-
secutively until the desired mode is reached. For processing
mode
A
,
B
and
C
, both LEDs need to be turned on. See the sup-
ported format table in section
5 Specification
for details on
resulting outputs.
Mode A:
use this mode to output 25PsF signal from a 24p or
24PsF input signal.
Direct output:
use this selection to output a signal with the same
format as the input signal.
3:2 Insert:
inserts a 3:2 sequence to output a 59.94i and 60i signal.
Mode B:
reserved for future use
P
→
PsF:
use this selection to output an interlaced signal from
a progressive input signal.
PsF
→
P:
use this selection to output a progressive signal from
an interlaced input signal.
Mode C:
reserved for future use
Varicam 1:1:
use this setting to output a 24p, 25p or 30p signal
from a 60p or 59.94p signal originating from a
Panasonic varicam system.
Varicam 1:2 :
use this setting to output a 50p signal from a 60p
signal originating from a Panasonic varicam system.