Miranda SDA-172p, Руководство по эксплуатации

Страница: 12 / 18

SDA-172p - Guide to Installation and Operation
5
3 Installation
3.1 Power Supply
The power supplies LKS-WSA and LKS-WSE, for 110V and 220V
operation respectively, are used to power the SDA-172p. Each
power supply provides a reg5VDC@1A power source.
Plug the power supply into a wall or power bar outlet. The SDA-
172p uses a mini XLR-3 connector for its power needs; figure 3.1
provides a detailed pinout of the male connector.
Figure 3.1 Power connector pinout
3.2 Serial Digital Video Input
Connect a serial digital signal to the BNC labeled IN. The serial
digital input signal must conform to the SMPTE 259M-ABCD
standard or the proposed EN50 083-9 DVB-ASI (270 Mbps).
Make sure that the input signal cable has a maximum length of
250 m (850’) for a 270 Mbps input signal or 170 m (560’) for a 540
Mbps input signal. Also ensure that all serial digital video equip-
ment are connected point-to-point. For instance, there must be a
point-to-point connection between the IN BNC and the source
equipment. If a T-connector is used to connect other equipment,
the maximum specified cable length is no longer valid.
1 3
2
+5VDC
GND
Shield