Miranda NV9602, Руководство пользователя, Страница: 15 / 68

NV9602 Control Panel • User’s Guide 5
2. Introduction
Modes of Operation
The ‘Status’ and ‘Destination’ fields can show either names from a name set or system mnemonics
depending on (1) the state of the ‘Name Set Toggle’ button (if the panel has one), (2) the default
name set (3) the existence of name sets in the NV9000 configuration.
Flags
When a destination is in breakaway, the ‘Source’ field indicates the breakaway with an asterisk in
its eighth character position.
S
The asterisk will obscure the last character of the source name if the name has 8 characters.
Modes of Operation
The NV9602 operates in one of 4 modes:
• Single-Destination Mode .
• Single-Destination Mode with Breakaway .
• Limited X-Y Mode .
• Multi-Destination Mode .
The panel’s set of button functions varies with the mode.
The modes (or behavioral models) are determined at configuration. The operator cannot switch
between different modes.
S
The NV9604 control panel can operate as an extension of the NV9602. See the NV9604 User’s
Guide for details.
Single-Destination Mode
In single destination mode, the panel’s destination is configured as the default destination and there
are no destination buttons. Takes are performed on all levels.
Operators can use a ‘Source Shift’ button to toggle between two sets of sources.
Takes occur as soon as a source button is pressed. (There is no ‘Take’ button function.)
Single-Destination Mode with Breakaway
This mode is an extension of single-destination mode that includes level buttons on the panel.
Again, the single destination is configured as the default destination. There are no destination but-
tons and there is no ‘Take’ button.
Level buttons selected the levels on which the take is to occur. Takes occur on all levels when either
no levels are selected or when all levels are selected.
Operators can use a ‘Source Shift’ button to toggle between two sets of sources.
Limited X-Y Mode
In limited X-Y mode, takes occur from a single source to a single selectable destination.
Takes are all level. Pressing a source button completes the take. There is no ‘Take’ button.