Revision: 0
12
Technical specifications are subject to be changed without notice
8.5. Commands
8.5.1.
Audio crosspoint set
Only for use with Audio routers.
Command for setting of crosspoints:
1001nnnn
0kkk kkkk
0vvv vvvv
- nnnn is the matrix address from 0 up to 15.
- kkk kkkk is the output which shall be controlled.
kkk kkkk = output number
0
=
output
1
127
=
output
128
- vvv vvvv is the input which shall be connected to the chosen output.
vvv
vvvv
=
input
number
8.5.2.
Video crosspoint set
Only for use with Video routers.
Command for setting of crosspoints:
1010nnnn
0kkkkkkk 0vvvvvvv
- nnnn is the matrix address from 0 up to 15.
- kkk kkkk is the output which shall be controlled.
kkk
kkkk
=
output
number
0
=
output
1
127
=
output
128
- vvv vvvv is the input which shall be connected to the chosen output.
vvv vvvv = input number
8.5.3.
Crosspoint status request
This command is used for status request on Audio and Video routers.
1100nnnn
0xxxxxxx
- nnnn is the matrix address from 0 up to 15.
- xxxxxxx - do not carry any information
The requested router (Audio or Video) will send its crosspoint status on MIDI OUT and RS232. The same command format
as for crosspoint set is used.
