Miranda Kaleido-X (4RU), Руководство пользователя, Страница: 32 / 388

22
Getting Started
1
To log on to a Kaleido-X system from the RCP2, do the following:
1. Press the LOGIN key.
The following message will appear on the LCD display:
LOGIN Position
Admin
2. Press ENTER to select Admin.
A message prompting you to enter a password will appear on the LCD display.
3. Press ENTER again (by default, there is no password).
The message “Access granted” will appear on the LCD display if the login is successful. If a mouse is
connected to the RCP2, then you should be able to see and move the mouse pointer on the monitor
wall.
Note: If at any time the message “Target system is offline” or “No login list available” appears on the LCD
display, press the ESC, ENTER and DEL keys simultaneously and go back to step 1.
For more information, please refer to the Hardware Description & Installation Manual , available on the DVD
that shipped with your system.
Configuring an Audio Bridge Terminal
The optional Audio Bridge Terminal (ABT) is an external audio multiplexer/serializer for the Kaleido-X. The
Kaleido-X supports up to 128 inputs, and all of the video input connectors are located on the rear panels
associated with the KXI-series of cards.
There is not enough space on the rear panels to also include the audio connectors. The ABT provides
connector space for the audio signal inputs, and multiplexes all the audio signals into combined serial
feeds on coaxial cables that connect to the KXI cards.