8
| DVI-Ramp
2
/ DVI-Ramp
2
DSK
2 Installation
2.1 Unpacking
Make sure the following items have been shipped with your DVI-Ramp
2
. If any of the following items are
missing, contact your distributor or Miranda Technologies Inc.
- DVI-Ramp
2
unit
- AC power cord
- Power supply (AC to 12V DC converter)
2.2 Mechanical
Installation
The DVI-Ramp
2
is packaged in a free-standing case with feet on the bottom, suitable for installation on a
desk or tabletop.
The DVI-Ramp
2
is sized so that two DVI-Ramp
2
units can be installed side-by-side on a 1 RU tray for rack
mounting.
Figure 2.1
Installing two DVI-Ramp
2
units on a 1 RU tray (
TRAY-120
)
The rear panel of the DVI-Ramp
2
includes a threaded connection point for a mounting screw (left side of the
rear panel – see figure 2.2) so that the device can be securely mounted on the tray. The Miranda
TRAY-120
is recommended, as it is configured to hold the DVI-Ramp
2
case and incorporates a hole for the mounting
screw.
