GUIDE TO INSTALLATION AND OPERATION
UAP-1783 |
9
CONFIGURE ALARMS
YELLOW, RED, FLASH RED
(default depends on alarm)
NONE
, GPI
ALARM LEVEL
ALARM REPORT
CARD SYSTEM
OFF, ON
(default depends on alarm)
ALARM MODE
REFERENCE
TEST
AES INPUTS
IN1 NO LOCK
IN1 BIPHASE
IN1 PARITY
IN1 CRCC
IN1 VALIDITY
IN2 NO LOCK
IN2 BIPHASE
IN2 PARITY
IN2 CRCC
IN2 VALIDITY
IN1 AC-3
IN1 PCM
IN1 DOLBY E
IN1 NON-PCM
IN2 AC-3
IN2 DOLBY E
IN2 NON-PCM
IN2 PCM
NSD
PROC CH1
PROC CH8
...
PROC CH9
[EXT CH1/9]
...
PROC CH 16
[EXT CH8/16]
OVERLOAD
ANALOG IN4 (A/D)
ANALOG IN1 (A/D)
...
AES OUT 2R
ANALOG OUT 1L
...
PROC CH1
PROC CH8
...
PROC CH9
[EXT CH1/9]
...
PROC CH 16
[EXT CH8/16]
OUT MIXER 1, IN A
OUT MIXER 1, IN B
OUT MIXER 8, IN A
OUT MIXER 8, IN B
...
...
AES OUT 2R
ANALOG OUT 1L
OUTPUT MUTE
ADV PROC
parameter
, UP/DOWNMIX
parameter
OPTIONS
UAP-1783: xyz
VERSION
RESTORE
FACTORY DEFAULT
parameter
= OFF | ON
EXT CH1 - CH8
, EXT CH9 - CH16
CARD SYSTEM
NONE
, V + >A1<, V + >A1< + A2, V + A1 + >A2<, >A1< + A2, A1 +
>A2<
A-BUS CONFIG
A-BUS IN SELECT
REFERENCE
FREE-RUN, AES1, FRAME (20), FRAME (10), A-BUS,
AUTO