Miranda AMX-101i, Руководство по установке и эксплуатации

Страница: 8 / 19

5
2.4 AMX-101i Electrical Installation
Refer to Figure 2.5 for rear panel electrical installation.
4:2:2 IN: serial digital video input with active loop-through
Connect a 4:2:2 serial digital video source to 4:2:2 IN. The AMX-101i accepts a
4:2:2 serial digital video signal in either 525 or 625-line format. This input must
conform to the SMPTE 259M-C standard. Make sure the input 4:2:2 cable has a
maximum length of 250 m (850'). Refer to section 3.3, Input Status Monitoring
for a description of error and EDH status on the input signal.
Make sure that all serial digital video connections are point-to-point. For instance,
there must be a point-to-point connection between the 4:2:2 IN
BNC and the
source equipment. If a T-connector is used to connect other equipment, the
maximum specified cable length is no longer valid.
AUDIO IN: analog audio input
Connect 2 stereo or 4 monaural balanced analog audio signals to the AUDIO IN
connector. Figure 2.3 provides the pinout of the HD-15 rear panel connector.
Figure 2.3 AUDIO IN connector pinout (HD-15)
4:2:2 OUT 1, 2, and 3: serial digital video outputs
Serial digital video with inserted audio is provided by the 4:2:2 OUT 1, 2, 3
connectors. All outputs conform to the SMPTE 259M-C standard.
1
2
3
4
5
11
12
13
14
15
6
7
8
9
10
Gnd
Gnd
Gnd
Gnd
Gnd
Low
High
Low
High
Gnd
Gnd
Low
High
Low
High
Right
Right
Left
Left
Stereo 2
Stereo 1