MiraMate Joint Aid, Инструкция по эксплуатации, Страница: 10 / 18

1.2 Mode Setting
1) After turning the device on, press "Mode" to select mode.
There are two adjustable modes: “Pulse output mode” and
“Continuous output mode”.
Continuous wave lasers are best for pain control. Pulsed wave
lasers are better for healing and reducing inflammation. We
recommend using "Continuous output mode" for pain relief
first and then "Pulse output mode" for long term healing.
2) Press "Mode". The buzzer will "beep", and the corresponding
icon on the LCD screen will light up (Figure 3.)
Note:
If it is unnecessary to adjust the mode, please press “Time”
directly to set the time. The device will operate according to
the mode last used.
7