11
Log Set
The Ceramic logs are durable and long lasting when installed
properly. However, they are delicate and may be damaged
easily if not handled with care. Unpack and inspect log set.
There should be a total of 4 logs as shown in Fig. # 16. All gas
and venting connections should be made before installing log
set.
Log Assembly:
(Fig. # 15)
1) Place the rear log in position at the back of the firebox,
centered between the brackets, with flat side facing rear
and the bark side facing forward.
2) Place the front log over the two pins just in front of the rear
burner onto the tabs located at the front of burner
assembly. The log is notched to fit over the pilot.
3) The top left "Y" log bridges across front and rear log. The
log should be properly seated over pin in the front log and
nested in the left relief of the rear log.
4) The top right log also bridges across the front and rear log.
The log should be properly seated over the pin in the front
log and nested in the right relief of the rear log.
Note: Improper placement of logs may cause sooting on
internal parts and glass.
Fig # 15
Left "Y" Log
Front
Log
Back Log
Right Log
Fig. #16
Back Log
Front Log
Top Left "Y" Log
Top Right Log
f i r e - p a r t s . c o m
Содержание SERIES A
Страница 17: ...17 Fig 28 fire parts com...
