1
7” (180)
13
½
”
(3
40
)
9½
”
(2
40
)
14
¾
”
(3
75
)
16
½
”
(4
20
)
F
4
3
2
¼” (
5
1
3 )
10)
½” (
7” (
180
)
1
O
T
93
12
-1
08
31
/0
5/
20
10
EDENTON WALL-HUNG WC
This bowl needs an in-wall-carrier for installation.
Please use the install instruction that comes with the
in-wall-carrier of your choice.
INSTALLATION INSTRUCTIOS
FOR MIRED220WH
15 ” (228)
3
13
½
”
(3
40
)
9½
”
(2
40
)
14
¾
”
(3
75
)
16
½
”
(4
20
)
F
This bowl requires an in-wall tank system for
installation. Please use the install instructions
that come with the in-wall tank system of your
choice.
BEFORE YOU BEGIN
• Carefully inspect the new toilet for damage.
BEFORE YOU BEGIN
• Carefully inspect the new toilet for damage.
• If the existing toilet does not have a supply
shut-off valve below the tank, install one
before installing the new toilet.
1. REMOVE THE EXISTING TOILET
• Turn off water supply.
• Flush toilet, then sponge out all remaining
water from tank.
• Disconnect supply shut-off valve (if present),
and remove old tank and bowl.
TOOLS AND MATERIALS
10 “ Adjustable wrench
Supply shut-off valve
Tape measure
Level
Sponge
Wax seal
5/16” Bolts w/nuts and
washers
Putty knife
1/2” Nut driver/socket
Hacksaw
Screwdriver
CAUTION
Risk of personal injury or
product damage.
Handle with care. Vitreous china can break
or chip if the product is handled carelessly.
CAUTION
Risk of hazardous gases.
If the new toilet is not installed immediately,
temporarily stuff a rag in the closet flange.
2
1
• Remove old wax seal from floor with
a putty knife.
• Replace old bolts with the new 5/16”
diameter bolts.
Putty knife
Old wax seal
Flange
Flange
5/16” Diameter bolts
CAUTION: PRODUCT IS FRAGILE.
TO AvOID BREAKAGE AND POSSIBLE
INJURY HANDLE WITH CARE!
