1
2
BEFORE YOU BEGIN
INSTALLATION
(cont.)
• Carefully inspect the new toilet for damage.
Pencil
Ruler
File
Sealant
TOOLS AND MATERIALS
INSTALLATION
L1
L
• Insert both inlet and outlet pipe into the pipe
hub inside the wall.
• Place straight edge against the wall and mark a line
for the dimension L1. (Fig.1)
• Remove both inlet and outlet pipe from the wall pipe
hub and attach the other end of the pipe into the toilet
bowl and waste outlet.
• Mark a second line onto the pipe for dimension L2.
(Fig.2)
Fig.1
Fig.3
L2
Fig.2
1
L1
L1
L2
L2
L2
L
L1
• Mark the third line L= L2 - L1 + 1/8” onto the pipe
measuring from the hub side.
• Use a hacksaw to cut off the pipes at the marks.
Repeat step for inlet pipe. (Fig.3)
• Bevel the rough edge with a file to ease insertion into
the wall pipe hubs. (Fig.4)
• Apply lubricant on the rubber seal to ease installation.
• Attach both pipes onto the bowl inlet and waste outlet.
(Fig.5)
Fig.4
Fig.5
• Determine protruding rod length for bowl installation
and adjust it.
• Add the sound barrier pad (provided) to the backside
of the bowl.
• Place the bowl onto the rods, then install the washers
and hex nuts.
•
Note:
It’s a universal sound barrier pad provided.
Please trim to fit onto the rear of the bowl before
installation.
Fig.6
