5 |
P a g e
Fast Blinking EZ method,
1.
Connect the supplied adaptor to the light and power on the light
2.
Wait for the blue indicator light start to blink rapidly (1 blink per second) – The
light is now ready to pair, if it fails to blink rapidly , press and hold the M key
until it to starts to blink,
3.
Please ensure your mobile phone is connected to your 2.4Ghz Wi‐Fi network
(Genio Smart light is not compatible on 5GHz Wi‐Fi network)
4.
Open the Mirabella Genio APP, then tap on “+” symbol, then choose Smart
Lighting, and select the genio desk light from the list
5.
Follow the APP’s instruction carefully to complete the network pairing
process. Please make sure you are using the correct 2.4Ghz Wi‐Fi name and
password.
if the fast‐blinking method (EZ method, mentioned above) doesn’t
work, please try the slow blinking (AP method) listed below.
Slow Blinking AP method (recommended method if you are using Telstra NBN
while the blue indicator light is blinking rapidly, press and hold the M key again, until
the blue indicator light is slowly blinking (1 blink every 2 seconds)