Before use, please remove the battery cover screw and pull out the transparent chip from the bottom of the IR
remote, and refit the screw again. Please keep the button cell battery out of reach of children..
Make sure the IR remote aims at the IR receiver within the sensing distance. The angle of the IR receiver is 120deg
and the sensing distance is 5 meters. Please remotely control within the sensing range.
Wi‐Fi Controller
Music: short press to entre the music mode, you can switch between 4
music modes
Colour: Short press to switch between 20 colour scene modes
ON/OFF: short press to turn on/off the led light, press and hold to
entre the EZ pairing mode, press and hold agin to entre the AP pairing
mode
Install the APP and register Account
For the best experience, download the "Mirabella Genio" APP to your smartphone from App Store or Google
Play, the APP icon will be displayed after it’s installed successfully, open the APP and register account.
Bluetooth pairing assistant function
on selected model only
Our latest genio smart Wi-Fi lighting range have Bluetooth pairing assistant function, to make the pairing even easier than
before, to take advantage of this function, please make sure turn ON the Bluetooth function on your phone,
1.
Take the light chain out of the box, fully uncoil it, Connect the light chain to the Wi‐Fi controller
2.
Plug the Wi‐Fi controller’s USB end to a standard 5V 1A phone charger (not included) or PC’s USB port.
3.
Light chain should start to blink red rapidly (1 blink per second), device is ready to pair with Genio APP.