3 |
P a g e
If this method doesn’t work for you, please
Turn OFF
the Bluetooth on your phone, and
then re-try one of the methods listed on the following page
(EZ method or AP method).
Pairing using the EZ method (when the light is blinking rapidly)
•
Press and hold the on/off at back of this light, wait for the light start to
rapidly blinking (2 blinks per second)
•
Open Mirabella Genio APP, tap on
the “
+
”
symbol, then tap on
“
add
manually
”
, select
“
Smart Lighting
”
-> Genio Pixel Light
•
Enter your 2.4Ghz Wi-Fi name and password, (make sure Wi-Fi name
doesn’t end with
-5GHz),
Follow the APP’s instructions carefully to
complete the network pairing process.
If the fast blinking method (EZ method, mentioned above
) doesn’t work,
please try the slow blinking (AP method) listed below.
•
While your light bulb is blinking rapidly, press and hold the on/off button
again, wait for the light to start to blink slowly (1 blink every 2 seconds),
Once it starts to blink slowly, the light is ready to pair to the APP.
Open the Mirabella Genio APP, tap on
the “
+
”
symbol,
then tap on “
add
manually
”
, select
“
Smart Lighting
”
-> Genio Pixel Light
