I003973 Genio 4M Wi‐Fi LED Pixel Strip Light
WARNING:
LED STRIP LIGHT CAN BE USED INDOOR OR OUTDOOR UNDER THE SHADE ONLY
ADAPTOR/ TRANSFORMER AND Wi‐Fi CONTROLLER MUST REMAIN INDOOR AT ALL TIMES
TO ENSURE THE SAFE AND SATISFACTORY OPERATION OF THIS SET PLEASE READ THESE INSTRUCTIONS CAREFULLY AND
RETAIN FOR FUTURE REFERENCE
FOR ANY QUESTIONS OR TROUBLESHOOTING PLEASE VISIT
www.mirabellagenio.com.au
We recommend that the set be tested prior to being set up in the desired location
SAFETY INFORMATION
:
• Remove set from the packaging before connecting to the power supply.
• Before using or re‐using the set, inspect the set carefully
• Use only with the adaptor/transformer supplied
• Do not connect the set electrically to another set from a different manufacturer
• Ensure that the cable is completely uncoiled whilst set is in use. Failure to do so may cause overheating
• Avoid damage to wire insulation (cable), as this could cause a short‐circuit and damage the transformer
• Do not use any set which has been: cut, damaged, or has frayed wire insulation, loose connections or exposed wires
Note: When connecting, please ensure the arrows are aligned with one another, otherwise it will NOT light up
When cutting the strip light, please only cut along the cutline as outlined in the diagram
