manualshive.com logo in svg

Mira MYLINE, Инструкция по установке и эксплуатации, Страница: 16 / 20

Поделиться
Скачать
Mira MYLINE Скачать руководство пользователя страница 16

16

Spray Plate Assembly

1.  Use a suitable tool to remove the grommets.
2. Using the 2.5 mm hexagonal wrench 

(supplied), remove the screws.

3.  Separate the sprayplate assembly into its 

individual components.

4.  Clean or replace components as necessary.
 

Note!

 Make sure that the seals are located 

correctly.

5.  Reassemble the components in reverse order.

Replacing the Sprayplate or Seals

Grommet

Screws

Seals

Seals

Cloud Spray Plate Assembly

This product is supplied configured for the 

majority of showering systems including electric 

showers.

Note! 

for showers with a pressure of below 0.15 

bar (1.5 metre head) it might be necessary to 

change the Cloud sprayplate assembly for the 

LC (Low Capacity) version in order to achieve a 

suitable spray pattern.

Caution! 

The LC sprayplate 

must

 not be used 

on electric showers
1.  Use a suitable tool to remove the grommets.
2.  Using the 2.5 mm hexagonal wrench 

(supplied), remove the screws.

3.  Separate the sprayplate assembly into its 

individual components.

4.  Replace the Cloud assembly sprayplate with 

the LC version.

5.  Reassemble the components in reverse order.

Replacing the Cloud Sprayplate Assembly

Grommet

Screws

Low Capacity

Sprayplate

Seals

Seals

Содержание MYLINE





















Отзывы:

Нет отзывов