3
INTRODUCTION
Thank you for purchasing a quality Mira product. To enjoy the full potential of your
new product, please take time to read this guide thoroughly, having done so, keep
it safe for future reference.
DESCRIPTION
Mira 1.5 bar Twin Ended Pump
Mira 2.0 bar Twin Ended Pump
An electric motor driven twin ended peripheral pump complete with an automatic
control system, consisting of flow switches and electronic controls.
CAUTION!
1.
Read all of these instructions and retain this guide for later use.
2.
Follow all warnings, cautions and instructions contained on the appliance.
3.
DO NOT
fit the appliance where it may be exposed to freezing conditions.
4.
The appliance is not suitable for areas with high humidity (i.e. steam rooms).
5.
The electrical installation must comply to "BS 7671 (commonly referred to
as the IEE Wiring Regulations) and all relevant building regulations, or any
particular regulations or practices specified by the local electricity supply
company.
6.
The plumbing installation must comply with all national or local water
regulations and all relevant building regulations, or any particular regulation
or practice specified by the local water supply company.
7.
To avoid damage to the appliance when soldered fittings are used, pre-solder
the pipework and fittings before connecting them to the flexible hoses.
8.
To make sure the appliance and supplied fittings are not put under strain
during installation, always provide mechanical support when making plumbing
connections. Upon completion of the installation, make sure the connections
are not under any stress due to misaligned pipework or electrical cables.
9.
DO NOT
commission this appliance if water leaks from the pump or flexible
hoses.
10. DO NOT
run the pump dry.
11.
There are no serviceable components within this appliance.
12.
When this appliance has reached the end of its serviceable life, it should
be disposed of in a safe manner, in accordance with current local authority
recycling, or waste disposal policy.
