Mira Coda, Инструкция по установке и эксплуатации

Страница: 6 / 20

6
sPeCIFICaTIons
Pressures
Max Static Pressure: • 10 Bar .
Max Maintained Pressure: • 5 Bar .
Min Maintained Pressure: (Gas Water Heater): • 1.0 Bar . (for optimum
performance supplies should be nominally equal.)
Min Maintained Pressure (Gravity System):
• 0.1 Bar . (0.1 bar = 1 Metre head
from cold tank base to shower handset outlet.)
Temperatures
Close temperature control is provided between • 20°C and 50°C .
Optimum Thermostatic Control Range: • 35°C to 45°C . (achieved with supplies
of 15°C cold, 65°C hot and nominally equal pressures.)
Recommended Hot Supply:
• 60°C to 65°C . ( note! The mixing valve can operate
at temperatures up to 85°C for short periods without damage. However for
safety reasons it is recommended that the maximum hot water temperature is
limited to 65°C.)
Minimum Differential between Hot Supply and Outlet Temperature:
• 10°C .
Cold Water Range: • 5°C - 25°C .
Thermostatic shut-down
For safety the thermostat will shut off the hot supply •
within 2 seconds
if the
cold supply fails. (achieved only if the hot supply temperature is greater than
10°C above the set blend temperature.)
Connections
Hot: Left • (side nearest flow control), ½” BSP Male.
Cold: right • (side nearest temperature control), ½” BSP Male.
outlet: Bottom • , ½” BSP Male to flexible hose.
note!
This product does not allow for reversed inlets and will deliver unstable
temperatures if fitted incorrectly.
Offset connector (inlet centres are 150 mm ± 24 mm).
½" BSP
Connection to Pipework
¾" BSP
Connection to Bar Valve