background image

3

9.  Installation of the shower must be carried out in accordance with 

these  instructions  by  qualified,  competent  personnel.  Read  all 

instructions before installing the shower.

10. 

DO NOT

 switch the shower on if water starts leaking from the shower 

case. Isolate the electrical supply to the shower immediately.

11. 

DO NOT

 switch the shower on if the case appears to be damaged 

or  incorrectly  fitted.  Isolate  the  electrical  supply  to  the  shower 

immediately.

12. 

DO NOT

 increase the power setting or adjust the temperature 

control rapidly while using the shower.

13. 

DO NOT

 switch the shower off and back on while standing in the 

water flow.

14. 

DO NOT

 change the handset model. Fit only shower heads 

recommended by Mira and do no fit any additional device to restrict 

the water outlet flow. 

15. When adjusting the handset mode, point handset away from body 

and make sure that the water temperature has stabilised before 

continuing to shower.

16. Use caution when altering the water temperature, always check 

the temperature before continuing to shower.

17. Switch the shower off at the electrical isolating switch when not in 

use. This is recommended with all electrical appliances.

18. Installation of the shower must be carried out in accordance with 

these  instructions  by  qualified,  competent  personnel.  Read  all 

instructions before installing the shower.

19. Isolate the electrical and water supplies before commencing 

installation. The electricity must be isolated at the consumer unit 

and the appropriate circuit fuse removed, if applicable. Mains 

connections are exposed when the cover is removed.

20. 

DO NOT

 install the shower in areas with high humidity and 

temperature (i.e. Steam rooms and saunas).

21. 

DO NOT

 install the shower where it may be exposed to freezing 

conditions. Ensure that any pipework that could become frozen is 

properly insulated.

Содержание Advance J97I

















Отзывы: