Spirobank Oxi
ENGLISH
Ver. 1.5
User Manual
Page 23 di 33
4.
ERROR MESSAGES & TROUBLESHOOTING
4.1
Error messages
If you encounter any problems when using the
Spirobank Oxi
, a message will appear on the
smartphone display to warn of the malfunction.
MESSAGE
POSSIBLE CAUSE
SOLUTION
Bluetooth
Bluetooth is deactivated
To perform measurements with the device, you
must activate Bluetooth on the smartphone.
Exit the application and activate Bluetooth from
the smartphone settings menu.
Battery low
When the
Spirobank Oxi
batteries are below 15%
charge
Replace the
Spirobank Oxi
batteries
4.2
Troubleshooting
If you receive an unusually low reading, it could mean that your FlowMir® meter is broken, or
that the reading is accurate and your asthma is getting worse.
Check that the FlowMir® is not broken. Scrupulously follow the instructions to obtain accurate
results.
If problems occur when using the device, the following points should be checked.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Spirobank Oxi
cannot
connect
with
the
smartphone
The Bluetooth connection is
not working properly
Look for
Spirobank Oxi
on the list of
recognized devices. For correct use, the
smartphone needs Bluetooth version
4.0 or higher
The test results are
unreliable
The turbine may be dirty
Clean the turbine as described in section
3.1.
Replace the FlowMir® with a new one,
by contacting the manufacturer
