Looking into the printer from above, install the
support clip(s) as shown. The one on the left (in the
photos below) is called a
T-bar clip
and the one on the
right is called a
square clip.
We have attached some
photos below of various printers. Some printers use a
T-bar clip, some a square clip and some printers use
both.
The function of the clip is to attach the pipeline
(through which the ink travels from the tanks outside
the printer to the cartridge inside the printer) to the
printer frame so that the printer head (with its
attached cartridge) can move easily but not tangle or
block the pipeline.
After you have attached the pipeline with the clip(s)
check that it has enough slack so that the printer
head can move through its entire range without
stretching the pipeline or potentially blocking it.
Clip the tube.
Slide the tube to the right as far as possible, making
sure the tube is straight.
5
