WWW.MIPTEL.COM
MIP0201000B
7
2. Connect the Combox™ to a PC using the RJ-45 cable provided with your unit. Plug the
RJ-45 end of the cable into the
LAN
port of the Combox™ and connect the other end to
the PC’s LAN port (Figure 2.2).
3. Connect a network cable to the WAN connector on the back of the Combox™ . Connect
the other end of the cable to your network.
4. Connect a RJ-11 cable to the Line and the other end to the PSTN. If you are connecting a
station device such as an analog telephone, fax machine, or Key Telephone System (KTS)
to your Combox™ , connect an RJ-11cable to the
Phone
connector on the back of the
Combox™ and the other end to the station device.
5. Turn on power to the Combox™ by plugging- in the adaptor. Wait for the Boot LED on the
Combox™ to go off before proceeding. This may take a couple of minutes.
WAN
LAN
LINE
PHONE
POWER
<Figure 2.2. Cable Connections>
