GB
GB
GB
GB
GB
GB
For all inquiries about your product, please have your receipt and product
number (e.g. IAN 12345) ready as your proof of purchase.
Guarantee and Service
The warranty period is three years and begins on the day of purchase. Please
keep your receipt as proof of purchase.
During the warranty period defective hand shower sets can, after contact with
the service, be sent to the Service address given with the carriage costs charged
forward. You will then receive a new one or a repaired unit free of charge.
After the warranty period has expired, you can similarly send the defective
product for repair to the address given. Repairs made after expiration of
warranty are subject to a fee.
This warranty does not limit your legal rights.
If you have any queries or faults with the product, please contact the following
Service address:
GB:
Sanifix Limited
Unit 68 Morgan Close
Willenhall
West Midlands
WV12 4LH
United Kingdom
Tel.:
+800-87934629*
E-Mail: [email protected]
*Freephone number
IAN 273989
To change the water jet type, follow these steps:
Adjust to the desired water temperature and desired water pressure using
your tap, and turn the water jet ring
4
of the hand shower head
1
.
Note:
It is advisable, not to adjust the massage jet too very powerful
when showering delicate parts of the body.
Maintenance and Cleaning
Please note that chromed surfaces require special care and attention. Therefore,
please follow the instructions:
When cleaning, never use petrol, solvents, aggressive cleansers or hard
cleaning brushes etc. These could damage the surface of the product.
Dry your shower head with a cloth after every use in order to avoid the
possible build-up of limescale.
Clean the product with a damp, soft cloth and a mild cleaning agent if
required.
Regularly move the anti-limescale soft jets and in doing so remove any
limescale deposits.
It must be expected that non-observance of the above care advice will
result in damage to the surfaces of the product. In this event your rights
under the warranty may be invalidated.
Disposal
The packaging is made of environmentally friendly materials, which
may be disposed through your local recycling facilities.
Contact your local refuse disposal authority for more details of how to dispose
of your worn-out product.
Assembly
Note:
Familiarise yourself with the product prior to assembly. Carefully read
the following assembly instructions and safety advice. In the event of incorrect
installation, all warranty claims – particularly in relation to subsequent damage
– are excluded.
Please ensure that the stopcock for the tap is
turned off.
ATTENTION
when working on hand showers that already have a water
stop function.
Otherwise there is a danger of injury and / or damage to objects.
Follow these steps:
Unscrew your existing hand shower head
1
from your shower hose
3
.
Check the seal in the connection piece of your shower hose
3
for leaks
and if necessary replace it with the seal
2
supplied.
Now screw the hand shower head
1
to your shower hose
3
.
Start-up
After the initial installation, carefully check all connections for leaks.
Operation
Your new hand shower head
1
is fitted with an LED lamp. The colour change
tasks place automatically, depending on the selected water temperature, using
an integrated temperature probe: approx. < 30 °C blue / approx. 30–39 °C
green / approx. > 39 °C red.
The LED lighting takes place using an integrated turbine (without batteries).
Your new hand shower head
1
is equipped with two water jet variations
(see Fig. B).
Technical Data
Shower connector: G ½
Scope of delivery
1 Hand shower head
1 Seal
1 Instructions for assembly/operation
Safety notes
DANGER TO LIFE AND RISK OF
ACCIDENTS FOR INFANTS AND CHILDREN!
Never
leave children unattended with the packaging material. Danger
of suffocation. Keep out of the reach of children. This product is not a toy.
BEWARE OF ELECTRIC SHOCK!
Leaks may result in
life-threatening injuries from electric shock.
Please ensure that the stopcock for the tap is turned off.
ATTENTION
when working on hand showers that already have a water
stop function.
Otherwise there is a danger of injury and / or damage to objects.
LED Shower Head
Introduction
Congratulations on your new product. You have selected a high
quality product. The assembly and operating instructions are part of
this product. Before you start the installation, please read through all
of these instructions and take note of the advice they contain. These instructions
contain important information about installation, settings and product care.
Keep these instructions safe and if you pass on the product to anyone else
please pass on the documentation as well.
Intended use
The product is only intended for installation on shower hoses attached to taps
for baths and showers. Any use other than that described above or modifica-
tion to the product is not permitted and may lead to damage. There is also the
risk of injury and loss of life. The product is for private use only and is not in-
tended for medical or commercial use. The manufacturer does not accept any
liability for any damage caused by improper use.
Parts description
1
Hand shower head
2
Seal
3
Shower hose (not included)
4
Ring for the setting of the water jet
Eisl Sanitär GmbH
Mattseer Landesstraße 8
A-5101 Bergheim
Stand der Informationen · Last Information Update:
02 / 2016 · Ident.-No.: DX7060-LIDL4022016-DE
273989_mio_LED Handbrause_DE.indd 2
17.02.16 10:53
Minimum required water pressure: 1.5 bar