background image

26

 © 2015 Minuteman International, Inc.

X17 ECO CFS Carpet Extractor  #988725UMCFS  Rev. C 03/18

Maintenance

Cord Storage

The X17 CFS is supplied with a detachable cord for ease 

of storage.

•  Regularly inspect cord for signs of damage. If cord is 

damaged replace immediately.

•  Do not use with damaged cord or plug. If appliance is 

not working as it should, has been dropped, damaged, 
left outdoors, or dropped into water, return to service 
center.

•  Do not pull or carry by cord, use cord as handle, close 

a door on cord, or pull cord around sharp edges or 
corners.

•  Do not run appliance over cord. Keep cord away from 

heated surfaces.

•  Do not unplug by pulling cord. To unplug, grasp the 

plug, not the cord.

•  Do not handle plug or appliance with wet hands.
•  This equipment should be stored indoors and not 

exposed to rain.

Review Safety Instructions & Decal Warning

For the operator’s safety:
•  Review and become familar with all the Safety 

Instructions described in this manual.

•  Visually inspect the Warning Decal, #715061 shown 

below, for damage and make sure it is legible.  This 
decal is located on the lower back machine wall, 
directly below the base of the handle.  If this decal is 
damaged or worn, please replace as necessary.

Decal 715061

Содержание X17 ECO CFS





































Отзывы: