Page 1 of 2
RPM-PROBE User’s Manual
The RPM-EV6 Remote Power Manager series can be setup to be used as, an Environmental Monitoring Device by
attaching the RPM-PROBE (Temperature/Humidity Probe). This is the installation procedure of the RPM-PROBE
(Temperature/Humidity Probe).
RPM-PROBE (Temperature/Humidity Probe)
Contents of the RPM-PROBE Package
1. RPM-PROBE (Temperature/Humidity Probe)
2. RPM-PROBE User’s Manual
Installation Procedure of the RPM-PROBE
1. Connect the RPM-PROBE’s connector (RJ11) to the RPM1581EV6, RPM30241EV6/RPM30242EV6 series
“ENV1” or “ENV2” port on the front panel.
2. Configure the RPM-PROBE (see the RPM1581EV6, RPM30241EV6/RPM30242EV6 series User’s Manual).
3. Once the installation is complete go to
http://www.minutemanups.com/support/warranty_reg.php
to register the
product.
