Minuteman Mirage M220021K17 Скачать руководство пользователя страница 27

24

WARRANTY INFORMATION

CARB SMALL ENGINE CERTIFICATION

MANUFACTURER: MINUTEMAN
INTERNATIONAL INC
ENGINE FAMILY:

WMNTS.4372K1
XMTRS.2492K3
XMTRS.4942K2

CALIFORNIA EMISSION CONTROL
SYSTEM WARRANTY STATEMENT

The California Air Resources Board and
Minuteman International, Inc. are pleased

to explain the emission control system
warranty on your 1998 and later utility
engine. In California, new utility and lawn

and garden equipment engines must be
designed, built and equipped to meet the
State’s stringent anti-smog standards.

Minuteman International, Inc. must
warrant the emission control system  the
your utility equipment engine for the

periods of time listed below provided
there has been no abuse, neglect or
improper maintenance for your utility

equipment engine.

Your emission control system may

include parts such as the carburetor or
fuel injection system, the ignition system
and catalytic converter. Also included may

be hoses, belts, connectors and other
mission-related assemblies.

Where a warrantable condition exists,
Minuteman International, Inc. will repair
your utility equipment engine at no cost

to you including diagnosis, parts and
labor.

MANUFACTURER’S WARRANTY
COVERAGE

The 1998 and later utility and lawn and

garden equipment engines are
warranted for two years. If any emission-
related part on your engine is defective,

the part will be repaired or replaced by
Minuteman International, Inc.

OWNER’S WARRANTY
RESPONSIBILITIES

As the utility and lawn and garden

equipment, you are responsible
for the performance the required
maintenance listed in your owner’s

manual. Minuteman International, Inc.
recommends that you retain all receipts
covering maintenance on your utility

equipment, but Minuteman International,
Inc. cannot deny warranty solely for
the lack of receipts or for your failure

to ensure the performance of all
scheduled maintenance. As the utility
equipment engine owner you should,

however, be aware that Minuteman
International, Inc. may deny you warranty

coverage if you utility equipment engine

or a part has failed due to abuse,
neglect, improper maintenance or
unapproved modifications.

You are responsible for presenting your
utility equipment to a Minuteman

International, Inc. distribution center as
soon as the problem  exists. The  warranty
repairs should be completed in a

reasonable amount of time, not to exceed
30 days.

If you have any questions regarding your
warranty rights and responsibilities, you
should contact Minuteman International,

Inc. at 1-800-323-9420. Minuteman
International, Inc. 111 South Rohlwing
Road, Addison, IL 60101.

MANUFACTURER’S EXPLANATION OF
WARRANTY COVERAGE

The engine manufacturer warrants to the
original owner and each subsequent

purchaser that each subsequent
purchaser that each new engine will be
free from manufacturing defects in

materials or  workmanship under normal
use during a period of two (2) years from
the date of  delivery, provided it is operated

and maintained in accordance with
engine owner manual operating
instructions.

Repair or replacement of any warranted
part will be performed at no cost to the

owner at a warranty station. For the
Minuteman International, Inc. repair
station nearest  you call 1-800-323-9420.

CARB SMALL ENGINE CERTIFICATION
MANUFACTURER: MINUTEMAN

INTERNATIONAL, INC.
ENGINE FAMILY:
WMNTS.4372K1

XMTRS.2492K3
XMTRS.4942K2

Any warranted part which is not
scheduled for replacement as required
maintenance, or which is scheduled only

for regular inspection to the effect of
“repair or replace as necessary” is
warranted for the warranty period. Any

warranted part which is scheduled for
replacement as required maintenance
is warranted for the period of time up to

the first scheduled replacement point for
that part.

The owner will not be charged for
diagnostic labor which leads to the
determination that a warranted part is

defective; if the diagnostic service is

performed at a warranty station.

Minuteman International, Inc. is liable for
damages to other engine components
caused by failure of a warranted part still

under warranty. Minuteman International,
Inc. is not liable for failure of warranted
parts caused by the use of add-on

modified parts.

Warranty service or repairs are available

at all Minuteman International, Inc service
centers that are franchised to service this
engine.

Any Minuteman International, Inc.
approved replacement part may be

used in the performance of warranty
maintenance or repairs on emission-
related parts and will be provided to the

owner without charge if the part is still
under warranty.

The owner is responsible for the
performance of the required
maintenance, as defined in the

Minuteman International, Inc. owner’s
manual for this engine.

SPECIFIC EMISSION-RELATED
WARRANTED PARTS

Fuel Metering System

Carburetor and internal parts
LPG Regulator

Air Induction System

Air intake manifold
Air filter element

Air filter element-prefilter

Ignition System

Spark plug

Magneto

Catalyst or Thermal Reactor System

Exhaust manifold

Muffler

Miscellaneous items used in above
systems

Fuel line and vacuum hoses, wire
harness, connectors & assemblies

To obtain warranty service, you must take
your equipment together with proof of
original retail purchase date, at your

expense to an authorized engine dealer If
upon a warranty inspection, a defect is
identified, such warranty repairs or

replacement will be made without charge
for parts or  labor.  All parts replaced under
warranty will be considered as part of the

original product and any warranty on those
parts will expire coincident with the original
product warranty.

Issue Date: 11/11/97

Содержание Mirage M220021K17





























Отзывы: