Minuteman m12110, Инструкция по эксплуатации

Страница: 5 / 28

10
9
8
6
7
13
5
11 4
1
2
3
12
Know your machine
Working Principle
Preparing for use
(1)
(2)
(3) Tank
(4) Bottom handle
(5) Dirty water tank
(6) Filter
(7) Lid Cap
(8) Boot
(9) Nozzle
(10) Conveyor drum
(11) Brush
(12) Pedal
Top handle
Liquid discharge control
handle
1. Cleaning liquid in the fresh water tank is made to
spray on the floor to be washed.
.
2. The counter rotating brushes scrubs the floor and
also throws the dirty water on the Conveyor drum. The
front brush does most of the scrubbing and drying. The
rear brush completes the scrubbing and collects the
remaining water off the floor.
3. A blade fitted to the dirty water tank wipes the drum.
1. To save packing space and to ensure the safety of
the machine during transporting, the PORT A SCRUB
comes to you with its handle dismantled. Ensure that
the listed parts are present as shown and identify
them in order to understand the assembly
instructions.
2. Remove the hook which holds the bottom handle
with the machine body while holding the bottom
handle.
5
Front
1. Bottom handle
2. Machine body
3. Pump Housing
4. Auxillary Tank
5. Top handle &
pull cable
7. Brush shafts (2)
8. Screws & washers
9. Cable retainer
10. Power cord
6. Handle LH & RH 11. Dirty water tank
12. Hook
13. Knob
Warning! Since the bottom handle is spring
loaded, the casual removal of the hook may
result in sudden springing back leading to
possible injury to personnel.
(10)
(11)
(12)
(7)
(8)
(9)
(6)
(2)
(3)
(4)
(5)
(1)