Minuteman E 17e, Руководство пользователя

Страница: 27 / 30

27
Maintenance
Maintenance work
Compliance with our recommendations concerning maintenance work will give you the certitude always having a
machine at your disposal, which is ready to work and in good operating condition.
It is better to take precautions than to repair damages - and less expensive! Please contact your local Minuteman
distributor; the people there will be glad to perform that work for you. There well trained personnel and genuine
Minuteman spare parts are at your disposal. In case of any inquiries or orders for spare parts, please always quote
the machine's serial number mentioned on the nameplate. The name plate is fixed in the rear side of the machine.
When cleaning or servicing the machine, and when replacing any parts, shut off the machine and on principle
disconnect the power plug from the power supply. For reasons of safety during cleaning and/or maintenance work in
or on the tank, the tank lid - when lifted - must be secured so as to prevent accidental closing or tilting down. The
machine may be taken into operation only if all guarding devices are fitted and in protective position. As far as
possible, cleaning should not be done by hand, but using appropriate tools or equipment. Maintenance and repair
work may be carried out only by means of suitable tools and by the people trained in the factory. For reasons of safety,
only genuine Minuteman spare parts may be used.
Before performing the maintenance, inspection and/or repair work described below, check all operating
elements and components of the machine for proper operation, and identify any possible
Malfunctions.