Minusforty 20X-UDGF, Руководство пользователя

Страница: 10 / 14

5 14
NOTICE:
Ensure the freezer has reached the proper operating temperature before loading product.
The electronic control displays the interior cabinet temperature.
Product loss is not covered under warranty.
PRODUCT LOADING
DO NOT
stock any products against the
evaporator fans. See load limit labels inside
the cabinet for reference.
DO NOT
block the air space behind the grill.
Free space is required for proper air circulation.
DO NOT
overstock the unit.
For enhanced performance of the unit and to avoid spoilage of perishable products, follow these
instructions:
DO NOT
stock any products against the
evaporator fans. See load limit labels inside
the cabinet for reference.
DO NOT
block the air space behind the grill.
Free space is required for proper air circulation.
DO NOT
overstock the unit.
ISD TRANS-LIGHT LED STRIP REPLACEMENT CONT’D
WARNING
Make sure the freezer is disconnected from the power supply before any service. Press the
freezer switch to the “Off” position then unplug the power cord from electrical receptacle.
All service work must be conducted by a certified technician only.
Slide out the old panel and
replace with the new panel.
Plug the freezer in and make
sure the light switch on the
bottom grill is in the ‘ON’
position.
GRAPHIC PANEL REPLACEMENT (IF EQUIPPED)
Plug the freezer in and make
sure the light switch on the
bottom grill is in the ‘ON’
position.
Remove the two plastic screw
covers and the two screws from
the right hand display end cap.
Slide the right hand display end
cap from the display frame.
Replace the display end cap.
Replace the plastic screw
covers on the display end
cap.
Replace the two screws and plastic
screw covers on the display end cap.
To turn the display lighting “ON” or
“OFF”, use the display light switch.
To turn the display lighting
“ON” or “OFF”, use the display
light switch.