Minus Forty 09-USGF, Руководство пользователя

Страница: 16 / 16

10
ISD TRANS-LIGHT LED STRIP REPLACEMENT CONT’D
WARNING
Make sure the freezer is disconnected from the power supply before any service. Press the
freezer switch to the “Off” position then unplug the power cord from electrical receptacle.
All service work must be conducted by a certified technician only.
Remove the plastic screw
covers from the right hand
side of the display. With a screwdriver remove
the two screws from the right
hand side of the display. Slide the right hand display end
cap from the display frame.
Replace the display end cap.
ISD TRANS-LIGHT LED STRIP REPLACEMENT (IF EQUIPPED)
Disconnect LED strip wires
from connectors and peel LED
strips off freezer. Install replacement LED strips
at the same place and connect
wires. Observe color coding.
WARNING
Make sure the freezer is disconnected from the power supply before any service. Press the
freezer switch to the “Off” position then unplug the power cord from electrical receptacle.
All service work must be conducted by a certified technician only.
Replace the two screws on
the display end cap.
Remove the two plastic screw
covers and the two screws from
the right hand display end cap. Slide the right hand display end
cap from the display frame.
Replace the display end cap.
Slide the diffuser panel and
graphic panel (if used) out of
the frame channel.
Slide out the old panel and
replace with the new panel.
Replace the diffuser panel and
graphic panel (if used).
Plug the freezer in and make
sure the light switch on the
bottom grill is in the ‘ON’
position.
Replace the plastic screw
covers on the display end
cap.
GRAPHIC PANEL REPLACEMENT (IF EQUIPPED)
Plug the freezer in and make
sure the light switch on the
bottom grill is in the ‘ON’
position.
Replace the two screws and
plastic screw covers on the
display end cap.
11