M I N T R O N I X C O M P U T E R S O L U T I O N S
124 Old Mill Road, Suite H
Greenville, SC 29607
855-672-6464
Page 17
Version 1-2018
26.0 Boot
Setup Prompt Timeout - Number of seconds that the firmware will wait before
initiating the original default boot selection. A value of 0 indicates that the
default boot selection is to be initiated immediately on boot. A value of
65535(0xFFFF) indicates that firmware will wait for user input before booting.
This means the default boot selection is not automatically started by the
firmware.
[ 1 ]
Select the boot keyboard NumLock state.
[ On ]
Enables or disables Quiet Boot option.
[ Disabled ]
Sets the system boot order. Boot Option #1.
[ UEFI: Built-
in EFI…
]
27.0 Save & Exit Configuration
Save Changes and Exit. This item allows you to exit system setup after saving
the changes.
Discard Changes and Exit. This item allows you to exit system setup without
saving any changes.
Save Changes and Reset. This item allows you to reset the system after saving
the changes.
Discard Changes and Reset. This item allows you to rest system setup without
saving any changes.
Save Changes allows you to save changes done so far to any of the options.
Discard Changes allows you to discard changes done so far to any of the
options.
Restore Defaults allows you to restore/load default values for all the options.
Save as User Defaults allows you to save the changes done so far as user
defaults.
Restore User Defaults allows you to restore the user defaults to all the options.
Boot device select can override your boot priority.