Minsk Tractor Works Belarus 1221.2, Руководство по разборке и сборке

Страница: 115 / 302

Disassembly-assembly manual for tractor BELARUS-1221.2/1221 В .2/1221.3/1221.4
114
4.6.13 Assembly of parking brake control lever
а ) press handle 1 on lever 2 (Figure 4.138);
b) insert tie-rod 17 inside lever handle 2, connect it to fixing element 3 and fix with cotter pin ом 16;
с ) from upper end insert inside handle 1 of lever 2 washer 18, spring 19, press tie-rod 17 from
below, and screw button 20 on it;
d) install sector 5, once it was dismounted, on cabin side plate, secure it with bolts 4 and mount on
it on axle 15 lever 2 as an assembly with tie-rod 17;
1 – handle; 2 – lever; 3 – fixing element; 4 – bolt; 5 – sector; 6 – washer; 7, 8 – nut; 9 – pin; 10, 16
– cotter-pin; 11, – tie-rod; 12 – checknut; 13 – yoke; 15 – axle; 17 – tie-rod; 18 – washer; 19 –
spring; 20 – button.
Figure 4.138
e) connect tie-rod 4 (Figure 4.139) with lever 7 by means of pin 6;
f) put lever 1 to extreme bottom position, loosen checknut 5, unpin and remove pin 6;
g) by screwing up or unscrewing yoke of tie-rod 4, set length of tie-rod to align top edge of groove
“ А ” on the right-side lever of foot brake with top edge of groove “ А ” of lever 9;
h) lock yoke with checknut 5;