5
Fig.E
6
Fig.F
Fig.G
7
Fig.H
M6x70 Bolt
Install the Reinforcement Bars to the Main Pillar with supplied
M6x70 type-A bolt, Plastic washer, M6 flat washer and M6
Nylon nut.
Then tighten the M6x18 bolts on the Backside Leg firmly.
(see Fig. E)
Plastic Washer
Reinforcement Bar
Longer Side
Shorter Side
Rectangle Nut
Stainless Band
Assembled
Stainless Band
Plastic Bracket
Once disassemble the Stainless Band Clip.
Wind the Stainless Band around the Main Pillar, insert the tip
between the Rectangle Nut and the box part of the band, and
apply the Plastic Bracket.
Attach the Upper Hook or Lower Hook onto the Plastic Bracket,
then tighten the bolt securely. (see Fig. F & G)
Upper Hook
Lower Hook
P-600 is a tall stand, so you must maintain the balance whenever you
use it to prevent from any accident.
Adjust the Height Adjuster on each legs to keep the Main Pillar
vertically, then tighten the Lock Nut firmly with 13mm open wrench.
(see Fig. H)
< Complete Style with Bikes >
For More Information
MINOURA JAPAN HEAD OFFICE
1197-1 Godo, Anpachi, Gifu 503-2305 Japan
Fax +81-584-27-7505 / Email [email protected]
http://www.minoura.jp
MINOURA NORTH AMERICA
(for North American residents only)
1996 East Avenue, Hayward, CA 94541 U.S.A.
Fax 1-510-538-5899 / Email [email protected]