- 6 -
!
How To Adjust Resistance Power
You can switch the resistance power in 2 levels
(High & Low) on FG220.
Slide the lever on the right side of the rear
roller drum.
They are just one piece so move together.
ON
OFF
!
Boost Hub and 12mm Thru Axle can be used by replacing
the front fork support sleeve set.
How To Use The 15mm Thru Axle
Required Tool :
3mm Hex Wrench
(not included)
The front fork support is compatible with both the
standard 9mm quick release skewer and the 15mm
thru type axle.
To use 15mm thru axle, remove the headless bolts
under the sleeve guide end in the fork mount (do
not remove the normal bolts) and pull out both the
red adapter sleeve and the Q/R.
Align the front fork and the fork support hole,
insert the 15mm axle to set the front fork.
(The bottom side of the fork mount)
Headless
Bolt
Adapter Sleeve (red)
Make sure of the bolt type you are going to remove.
Do not remove the standard bolt with head.
