- 4 -
Insert the left side of the skewer (Q/R lever side) into the left side cou-
pling, and adjust the rotation of the coupling so the skewer lever sits
securely in the large cut-out (see Fig. F). This will prevent damage to the
skewer during use.
(Fig. B)
Open the frame support leg fully and place it on the flat and level floor.
Open both couplings by turning the left side knob (see Fig. C) and the right side hub handle (see Fig. D)
anti-clockwise.
Do not over-loosen the couplings, otherwise the knob or the hub handle may become unthreaded inside
the frame.
1
2
3
(Fig. C)
(Fig. D)
Left Side Knob
Right Side Hub Handle
Install the Mag resistance unit on the left side slot and
the assistant roller on the right side slot beside the trainer
pillar by the supplied M6x12 bolts. (see Fig. B)
NOTE:
We recommend you to use the reinforcement plate
(SR-13) for installing the Mag unit. This plate will sandwich
the slot plate from outside for mounting the heavy Mag unit
stable.
<Required Tools: M5 hex wrench>
(Fig. E)
4
NOTE:
NOTE:
NOTE:
NOTE:
NOTE: We suggest you do not need to move the left side coupling away so
much. It should be fine to move by the center of its length, but it needs to be
adjusted depends on the hub width. (see Fig. E)
Hold the bike firmly by hand and turn the right side hub handle clockwise until the coupling comes into
contact with the right side skewer nut.
(Fig. F)
5
HOW TO SETUP YOUR E-HYPER-RIM ALU TRAINER
All manuals and user guides at all-guides.com
