Minolta PagePro 25, Руководство пользователя

Страница: 198 / 263

9 Recognizing and eliminating problems
9-22 PagePro 25 Rev. 3.1.1/16.07.99
9.6 General print problems
Problem Possible cause Action to take
No output The printer is not connected to
the power supply, or the cord is
not connected to the printer. Check the power connection and
the interface connection of the
printer.
The printer is not turned on Turn the printer on.
You are using the wrong
interface cable type. Check whether the interface
cable type conforms to the
specifications, see page 10-4.
The connection settings were
not made correctly for your
printer. Check the connection settings of
the printer.
Paper is not drawn
in correctly. The paper feed roller is
damaged. Remove the paper feed roller
and check it over for damage. If
necessary, replace it with a new
paper feed roller, see page 8-12.
The printout has
shifted on the
paper. The paper feed roller is worn out. Remove the paper feed roller
and check it for signs of wear. If
necessary, replace it with a new
paper feed roller, see page 8-12.
The offset settings of the tray
from which the paper was drawn
in are not correct. Correct the settings for “Upper
Offset“, see page 6-14 and/or
“Left Offset“, see page 6-21.