Minolta MNOT2L, Руководство пользователя, Страница: 6 / 9

3. Using Your Intelligent Face Tracker
6
2. First Use
2.1 Charging the Battery
Connect your motion tracker to the included AC adaptor with the USB
cable provided for charging. Insert the small end of the USB plug into the
motion tracker
’s port, and the larger end in to the included AC adaptor.
The status LED will light up Red when charging. The Red LED will turn off
when the tracker is fully charged.
2.2 Powering the Motion Tracker On/Off
Hold the POWER button for 3 seconds to power the motion tracker on. To
power the motion tracker off, press and hold the POWER button for a
further 3 seconds.
2.3 Pausing Tracking
Press the POWER button to pause the tracking function. Press the
POWER button again to resume tracking.
2.4 Connecting to a Computer as a PC / Webcam
Your motion tracker can connect to a computer to be used as a webcam.
Simply connect the small end of the USB cable into the motion tracker, then
connect the large end of the USB cable into the computer. After connecting
your device and powering on, the computer will recognize the device and
install any necessary drivers. Allow your PC 1-2 minutes to fully load all of
the device drivers for process use. Once installation is complete, the
device’s tracking lens will now act as a webcam and will track your
movement as well.
3. Using the Face Tracker
Hold down the Power button for 3 seconds. The device will power on and
will perform a self-test for 10-15 seconds at start-up. The device will perform
several rotations during the self-test. The front LED indicator will light a solid
blue color during the self-test process. Once the self-test is complete the
front LED indicator will flash blue, indicating it is in auto-tracking mode.
To pause tracking and set the tracker in a fixed position, press the POWER
button once. Press the POWER button again to resume tracking.