37
CONTINUOUS - ADVANCE MODE
36
SELF-TIMER
1. Place the camera on a tripod,
then press the self-timer
button until
appears in the
data panel.
2. Center your subject in the
focus frame.
3. Press the shutter-release
button all the way down to
start the timer.
• The self-timer indicator on the front of the
camera will blink, then glow just before the
shutter releases.
The self-timer delays the release of the shutter for approximately 10
seconds after the shutter-release button is pressed.
Press the self-timer button or slide the main switch to
LOCK to cancel the self-timer before the shutter
releases.
• Self-timer mode is cancelled after the shutter is released.
• Do not press the shutter-release button while standing in front of the camera.
• Attach the eyepiece cap if there is a bright light source behind the camera (p49).
1. Press the drive-mode button
until
appears in the data
panel.
2. Press the shutter-release
button down and hold.
• When taking flash pictures, the shutter will
release after the flash is charged.
• When the subject is moving, the shutter will
release after the camera focuses on the
subject.
• To return to single frame mode, press the
drive mode button until
appears in the
data panel.
In this mode, the camera continues to
release the shutter and advance the
film as long as the shutter-release
button is held down.
• AF Zoom xi and Power zoom lenses
cannot be zoomed when continuous-
advance mode is selected.
2154-E (US).qed 3/4/98 2:40 PM Page 36
