43
42
FOCUS HOLD IN REMOTE CONTROL MODE
When your subject is not in the center of the picture,
use focus hold (p20 in the camera manual)
1. Select remote-control mode on the
camera.
2. Center the focus frame on your subject,
adjust zoom as desired, then press and
hold the camera’s shutter-relaease button
partway down until the green focus lamp
glows.
3. Lift your finger from the shutter-release
button, then recompose the picture.
The remote control mode will remain selected after the picture has been taken.
Press the drive-mode button to delete the remote-control icon, or turn the
camera off.
CANCELLATION
• To save power, the camera automatically shuts down and the lens retracts if
the shutter is not released in approximately 8 min.
• The distance may be shorter or the remote control may not operate with backlit
subjects, under fluorescent light, or in extremely bright lighting conditions.
IR REMOTE CONTROL RC-3 (
SOLD SEPARATELY
)
Continued on next page.
2463_English 2/14/00 1:21 PM Page 42