Minolta CF911P Скачать руководство пользователя страница 15

Страница: 15 / 78

1-2

ty No

tes

r 1

1. Installing the Printer

Installation Site

To ensure optimal safety and prevent possible malfunctions of the unit, install the printer in a location
which meets the following requirements.

Power Source

The power source voltage requirements are as follows.

◆

Use a power source with little voltage fluctuation.

Voltage Fluctuation

: Within ± 10% (for U.S.A. and Canada)

Specified voltage ± 10% (For EU)

Frequency Fluctuation : Within ± 0.3% (For U.S.A. and Canada)

Specified frequency ± 3Hz (For EU)

Space Requirements

To ensure easy printer operation, supply replacement and service maintenance, observe the recommended
space requirements detailed below.
* Be sure to allow a clearance of 150 mm (6") or more at the back of the printer as there is a ventilation

duct.

◆

A place away from a curtain or the like that may
catch fire and burn easily.

◆

An area where there is no possibility of being
splashed with water or other types of liquid.

◆

An area free from direct sunlight.

◆

A place out of the direct air stream of an air
conditioner, heater, or ventilator.

◆

A well-ventilated place.

◆

A dry place.

◆

A dust-free location.

◆

An area not subject to undue vibration.

◆

A stable and level location.

◆

A place where ammonia or other organic gas is
not generated.

◆

A place which does not put the operator in the
direct stream of exhaust from the printer.

◆

A place which is not near any kind of heating
device.

C4119O003AA

Scale: mm(inch)

1,543 (6-3/4)

622 (24-1/2)

921 (36-1/4)

1086 (42-3/4)

640 (25-1/4)

1,276 (50-1/4)

511 (20)

765 (30)

,02

4 (4

1/4

)

Содержание CF911P















































































Результаты поиска

Содержание CF911P

Отзывы:

Похожие инструкции для CF911P

Бренды по названию

Популярные бренды

Minolta CF911P, Руководство оператора

Результаты поиска

Содержание CF911P

Отзывы:

Похожие инструкции для CF911P

Бренды по названию

Популярные бренды