Minolta 3D 1500, Руководство пользователя

Страница: 16 / 30

BASIC RECORDING PROCEDURE - CONT’D
- 31 -
BASIC RECORDING PROCEDURE - CONT’D
- 30 -
Steps through shown below are not necessary when using this camera
for the first time. Proceed with step .
Set “Quality” to “S.FINE (Super Fine)” in steps to when you used the
3D 1500 as an ordinary Dimâge EX (non-3D camera) by replacing the
MetaFlash unit with a zoom 1500 or wide 1500 lens (optional) and you
changed the “Quality” setting in the Burst mode.
In Record mode, press the MENU
button.
• The Record mode menus will appear.
Press the Left or Right button to
highlight “Media Settings”.
Press the Up or Down button to
highlight “Burst”.
Press the Edit soft key.
• The “Burst Settings” menu will appear.
Press the Up or Down button to
highlight “Quality”.
Press the Left or Right button to
select “S.FINE”.
• “Image Size” is fixed at “Full” and can not be
changed in the 3D mode.
• “Color” is fixed at “Full” and can not be
changed in the 3D mode.
• You can set “Burst Rate” from the screen in
the 3D mode but any change you made will
not be reflected (the same burst capture rate
is selected even if you selected any of
“Fast,” “Medium,” and “Slow.”).
Press the Exit soft key twice.
Frame the subject so that the
distance between the 3D 1500
and the subject falls between 50
to 90 cm and determine the
composition while referring to
the LCD monitor.
• Keep the subject as large as possible so that
it fills the entire 3D 1500’s LCD monitor
screen.
Continued on Next Page