E13
E12
Power is supplied to this flash automatically (auto power on) in the
following situations.
• When the camera is used with the flash
attached.
• When the flash on/off button is pressed.
Power is switched off and the indicator lamps turn off automatically
to save the batteries when the camera or flash is not used for four
minutes (auto power off).
• When the flash is switched off (right dia-
gram), the indicator lamps turn off after
eight seconds, or after 60 minutes in the
case of wireless flash (p. 29).
• The time of auto power off may be changed
or be disabled. (p. 36).
AUTO POWER ON/OFF AND FILM
Auto Power On
Auto Power Off
Film
Do not use high-speed film (rating in excess of ISO 1000). Use of
such film increases the exposure error.
• The low-speed film limit is the same as that for the films specified for
the camera. See the camera manual for details.
Flash on/off button
PREP
ARA
TION
ATTACHING AND REMOVAL
Attaching To The Camera
Push the mounting foot firmly
onto the camera until it stops.
• The flash is locked in place automati-
cally.
• If the built-in flash in the camera is
raised, lower it before fitting the flash
unit.
Removing From The Camera
While pressing the mounting-foot
release button
, remove the
flash .
3600HSD_E.qxd for final 00.10.3 12:01 Page E12
